EvoControl Ventilation – Light – MPO

The wiring between the unit and the display is fully assembled.

Kablaget kan förlängas med egen 4-ledare, max 25 metres, min conductor area 0.25 mm2 (pair-winning is recommended).

You can See the wiring diagram here.

Installation of the display:

• The control panel is mounted directly on a flat surface.
• The cable can be pulled upwards, downwards or straight backwards.
• For downward installation, the back cover must be unscrewed and turned over.
• For upward or downward installation, the thin plastic wall in the bottom part may have to be removed for the cable.

Connect the supplied wiring harness to the connector on the bottom of the control panel.

Open the flaps on the front of the control panel and screw it to the base.

Close the flaps again.