EvoDry EDC 1.0 Dehumidifier – MPO

There are two types of humidity settings:

1. humidity setting:

• Set the desired maximum relative humidity in .
  The dehumidifier dehumidifies as long as the moisture content is above the set value.
  Hystersen is +- 2.

From software version 1.3.0 the hysteresis is adjustable!

• Constantly on.
  Dehumidification is constantly taking place.
• Constantly off.
  Dehumidification never starts.

2. humidity control:

• RF.
  Dehumidification starts when the relative humidity of the air exceeds the set value.
• RF + Temp.
  Dehumidification starts when the relative humidity of the air exceeds the set value at temperatures above +15°C.
  The moisture content is allowed to rise by 1%/°C at temperatures below +15°C before dehumidification starts.
  The function is only active in the temperature range 0-15°C.
  At temperatures below 0°C, the curves continue horizontally, i.e. the moisture content is allowed to be 15% above the set value no matter how cold it gets.