Go to content
Logo
Create Case

Changelog EvoControl Pro series

Language:
en-GB
Models: EvoDry 30 Pro – 180 Pro

1. Software version

Set values are not changed during a software update.

2025-10-03

General:

  • Internal improvements.

Bug:

  • Network bug regarding static IP fixed.

2025-02-19

General:

  • Internal improvements.
  • Small adjustments to temperature reading and cloud service management.

2024-10-30

General:

  • Internal improvements.
  • Adjustment of response time for Modbus reading.

Bug:

  • An A alarm does not stop the unit unless “Emergency = On”.

2024-10-07

General:

  • Internal improvements.
  • Delay in software reset so that values can be safely stored away at restart.

New:

  • Ominitisation of modbus in case of no communication.
  • New parameter IDs for “Alarm clock” (ID 8000->) and “Alarms / Alarm history” (ID 9000->).
  • Note: New parameter id for “Time clock” and “Alarm / Alarm history”, affects those using Modbus!

2024-04-01

General:

  • Internal improvements.

New:

  • Parameter (5220) inserted that can be activated in case of network loss to do an automatic software restart.

2022-07-11

General:

  • Internal improvements.

New:

  • Split priority order for external inputs (parameters 470-472), Save-External 2 (terminals 1-6) / Stop (terminals 7-8) / Fire (9-10).

Bug:

  • If “Auto” is selected in the timer, the “Auto” button must also be active.

2022-04-12

General:

  • Internal improvements.
  • Aligned texts in the control panel.
  • Larger network buffer.
  • Redirection of EvoCloud.

New:

  • The humidity deviation output, terminal 36, can be used, for example, to change external ventilation.

2021-11-09

General:

  • Internal improvements.
  • Aligned texts in the control panel.

New:

  • Parameter for “Simplified control panel”, (means that the menu Operation and Timer is missing and replaced by the capacity buttons in the display menu).

2021-10-25

General:

  • Internal improvements.
  • Aligned texts in the control panel.

New:

  • Can switch off internal moisture sensor and use only external moisture sensor instead.

Bug:

  • The control panel updates humidity and temperature values even when the control panel is in screen saver mode.
  • Reduced flicker in some control panels, other solution is to increase brightness to 100% (parameter 5110).

2021-08-28

General:

  • Internal improvements.
  • Aligned texts in the control panel.

New:

  • Improved control of communication with the control panel.
  • Easier restart of the timer after a temporary override, one press of the timer button is enough.
  • More information boxes are displayed for “unauthorised” presses on the control panel.

2021-06-23

General:

  • Internal improvements.
  • Aligned texts in the control panel.

New:

  • Adjustable start and stop hysteresis.

Bug:

  • At “last input” and “external stop” or “external fire” the unit cannot be restarted. Solution: In case of “external stop” = hold down the stop button for 2 seconds then the unit will start. In case of “external fire” = change prioritisation (pararmeter 470) to “PRIO” and save then switch back to “LAST” then start the unit.

2021-02-26

General:

  • Internal improvements.

New:

  • Newly produced units show the inspection date and commissioning time under “System info”.

Bug:

  • None.

2020-12-17

General:

  • Internal improvements.

New:

  • None.

Bug:

  • The timer function “Auto fan” did not work correctly.
  • “Auto-fan” did not work properly.

2020-11-26

General:

  • Internal improvements.

New:

  • Drying out function of rotor and dehumidifier after dehumidification period.
  • Post-cooling of dehumidifiers after dehumidification period.

Bug:

  • ModBus, can read more than 16 “active alarms”, zero alarm history has new parameter number 11005.

2019-11-04

General:

  • Internal improvements.

New:

  • Modified screen saver.

Bug:

  • None.

2019-09-27

New:

  • Statistics to EvoCloud.

Bug:

  • None.

2019-08-16

New:

  • Must confirm “Reset”.
  • Test function.

Bug:

  • None.